Design of Photo voltaic Solar Cell Model for Standalone Renewable System
طراحی مدل سلول صفحات خورشیدی برای سیستم تجدید پذیر مستقل
نام مقاله به فارسی:
Design of Photo voltaic Solar Cell Model for Standalone Renewable System
نام مقاله به انگلیسی:
![طراحی مدل سلول صفحات خورشیدی برای سیستم تجدید پذیر مستقل](https://sp-ao.shortpixel.ai/client/to_webp,q_glossy,ret_img,w_549,h_348/https://www.ematlab.com/wp-content/uploads/edd/2017/03/EN37.jpg)
طراحی مدل سلول صفحات خورشیدی برای سیستم تجدید پذیر مستقل
طراحی مدل سلول صفحات خورشیدی برای سیستم تجدید پذیر مستقل
Abstract:
In the future, more and more pressure will be given on renewable smart applications. One type of renewable energy is the solar energy. A photovoltaic solar cell or a module is often used in mobile applications as energy source. More and more applications are covered with solar cell or module as the energy source. A simple and accurate mathematical model that describes properties of the photovoltaic solar cell is required for presentday dynamic development. The paper deals with the proposal of a model of PV solar cell and module. Proposed model is verified by the simulation using Matlab. The influence of the temperature and the solar irradiation on photovoltaic module is investigated and compared to the I-V characteristics of photovoltaic solar module Sharp, that were used as a source of the photovoltaic cell parameters. Proposed model can be used in research as a part of a simulation of stand-alone power system.
Keywords mathematical model, renewable energy, photovoltaic solar cell, module, simulation, Matlab, equivalent circuit.
INTRODUCTION:
Renewable energy has not only a big potential in mobile technologies. Shortly, the miniaturizing resources of fossil fuels, as coal, oil and gas, will increase the portion of renewable energy usage in the world. It is free, clean and sustainable source of electrical energy [3]. Photovoltaic (PV) solar power is the one of the most potential renewable energy source, especially in mobile applications. In the past, PV energy was used in the space industry or in calculators. Research in the last decades has increased the efficiency of PV solar cell. A new concept is the thin-film technology. In this case, the PV solar cell is made by one or more thin layers on substrate. More layers allow higher usage of the solar spectrum. Today, the highest efficiency 44.7 % of PV cell was demonstrated by Fraunhofer Institute for Solar Energy Systems [7]. Nowadays, a solar power is used as the energy source in the grid connected power systems, the battery chargers or the street lighting [6], [9], [10].
نوع مقاله | IEEE |
سال ارائه | ۲۰۱۴ |
گزارش کار | دارد |
شبیه سازی | در محیط MATLAB |
دیدگاه ها